Enzyme Cleaning of Soft Contact Lenses

What is enzyme cleaning of soft contact lenses?

Enzyme cleaning is the use of a special cleaning product for soft contacts that removes protein deposits from the lenses. Protein deposits can damage your lenses and irritate your eyes. Enzyme cleaning does not remove dirt and oils, and it does not kill germs. It must be done in addition to regular cleaning and disinfecting.

How often is it done?

Usually it is done once a week. Follow your doctor's instructions about how often to use an enzyme cleaner. Following the enzyme cleaning procedure on the same day each week may help you remember when to do it.

How is enzyme cleaning done?

You need an enzyme cleaner approved by your eye doctor, two small plastic vials (which usually come packaged with the enzyme cleaner), and a sterile saline rinsing solution.

A word of caution: It is often not safe to use distilled water with your enzyme cleaner. Distilled water can be contaminated. One organism in some distilled water, called Acanthamoeba, can cause an eye infection that is very hard to treat and can cause blindness. Most experts recommend that you buy a sterile saline solution for use with contact lenses.

To use your enzyme cleaner properly, follow these steps:

1. Wash your hands with plain soap and dry them.
2. Put one enzyme tablet in each plastic vial and fill the vials with sterile saline solution. Shake the vials until the enzyme tablets dissolve. They will fizz a little.
3. Put your right lens in the vial marked with an R and your left lens in the vial marked with an L. Let the lenses soak for the recommended time, usually at least two hours.
4. After the lenses have soaked, wash and rinse your hands thoroughly. Pour one lens into your palm, and use one finger to rub it back and forth for about 30 seconds. This helps remove loosened protein deposits.
5. Rinse the lens thoroughly with your saline rinsing solution. Then follow your daily cleaning and disinfecting procedure.

Repeat steps 4 and 5 with the other lens.

Remember that enzyme cleaning does not replace your usual cleaning and disinfecting procedures. After enzyme cleaning, clean and disinfect your lenses as you would each time you remove them.

What cleaning products should I use?

Some enzyme tablets are designed for use with chemical disinfection systems. Others should be used only with heat disinfection systems. Using the wrong enzyme cleaner could damage or discolor your lenses. Use the enzyme cleaner your eye doctor recommends.

Get your eye doctor's approval before you change solutions. Also, always read the instructions that come with your lens care products.