Request Appointment

Having Carotid Artery Stenting

During the surgical procedure, a long thin tube called a catheter is inserted into the artery. This is used to move instruments through the artery to put the stent in place. Your doctor will need to talk to you during the procedure, so you’ll be awake the entire time.

Inserting the Catheter

  • The skin in the area of the insertion site is first cleaned with an antiseptic solution, then numbed with local anesthetic. A puncture is made in the femoral artery, a major artery in the groin.

  • An introducer sheath (tube) is inserted into the puncture.

  • The catheter is inserted into the sheath. Using X-rays as a guide, the doctor moves the catheter through the sheat and up through the aorta, behind the heart, and to the carotid.

  • An angiogram of the carotid artery is taken. A contrast "dye" will be injected into a vein to show the location of the narrowed portion of the artery on X-ray. You may feel a warm sensation toward your head or the legs just after the dye is injected. Also, you may think that you see some flashing lights. This is normal and will only last for a few seconds. If it persists, let your doctor know immediately.

Placing the Filter

A filter or other protective device prevents pieces of plaque from being carried into the brain and causing a stroke. The catheter is used to place the unopened filter in the artery and advance it past the narrowed area. The filter is then opened. It remains in place for the whole procedure. If narrowing is very severe, the artery may need to be widened before the filter is put in place.

Cross section of internal and external carotid arteries. Catheter is inserted in internal carotid past plaque in artery wall. Catheter is releasing stent into artery. Filter is at end of catheter.Opening the Artery

The narrowed artery will be opened up or expanded if the narrowing is too tight to allow the stent to pass through. This is done using balloon angioplasty:

  • A tiny uninflated balloon is first moved to the area that needs to be widened.

  • The balloon is then inflated, pushing the artery open. The balloon may need to be inflated and deflated several times to open the artery enough.

  • After the procedure is done, the balloon is deflated and removed.

Placing the Stent

  • The stent is moved to the site of the plaque.

  • The catheter is then withdrawn, leaving the stent in place.

  • The stent expands until it touches the plaque. Balloon angioplasty is then used to expand the stent fully and widen the artery. You may feel a slight pain in your neck during the baloon angioplasty.

  • The balloon is withdrawn, leaving the stent in place to hold the artery open.

Checking the Result

An angiogram is taken and compared to the one that was taken at the beginning of the procedure. Once your doctor is satisfied with the result, the filter and other instruments are withdrawn. The groin insertion site is then closed.


Was this helpful?

Yes No

Tell us more.

Check all that apply.

Last question: How confident are you filling out medical forms by yourself?

Not at all A little Somewhat Quite a bit Extremely

Thank You!

 Visit Other Fairview Sites 
(c) 2012 Fairview Health Services. All rights reserved.